Batteryless telephone junction box
BATTERYLESS TELEPHONE JUNCTION BOX
Model:HX-8
Installation: Wall mounting type
It is used for connect the batteryless telephones. Its capacity is 8pcs telephones.
Batteryless telephone system is an emergency voice communication system that does not require any external power supply. The necessary energy to establish communications comes from a handle generator incorporated in the telephone. It is also available for hand / headset phone. There are different installation method: flush type, bulkhead type or wall mounting type, headset type.
This system also can be connected to 24 VDC power supply to ensure continuous operating under normal conditions. The system can be change-over automatically to batterylesss and emergency operating in case of power failure.
There are three different types for batteryless telephone system as follows,
It always connected by two direct-way type batteryless telephoen, e.g. one installed in Wheelhouse, the other installed in Engine Control Room.
It is also called selective type batteryless telephone system. The basic system consists of up to 12 batteryless telephones. Each telephone with a 12-way selector switch for selective calling between all connected stations. The system can be increased to 24 extensions.
It is connected by a selective-type telephone used as main stations, and some direct-way type telephone used as sub station. Main station can communicate with any sub station, but the sub stations can not be communicate with each other.
The above different types can be chose according different requirements.
No. | Description | IP Class | Weight (Kg) |
1 | Direct-way flush type batteryless telehone | IP20 | 0.8 |
2 | Direct-way bulkhead type batteryless telephone | IP44 | 1 |
3 | Direct-way headset type batteryless telephone | IP44 | 1.2 |
4 | Direct-way W.T. type batteryless telephone | IP56 | 4 |
5 | Direct-way E.X. batteryless telephone | IP44 | 3.5 |
6 | Multi-way flush type batteryless telehone | IP20 | 0.8 |
7 | Multi-way bulkhead type batteryless telephone | IP44 | 1 |
8 | Multi-way headset type batteryless telephone | IP44 | 1.2 |
9 | Multi-way W.T. type batteryless telephone | IP56 | 4 |
10 | Multi-way E.X. batteryless telephone | IP44 | 3.5 |
11 | Flashing light signalling unit 24 VDC | IP44 | 0.8 |
12 | Flashing light signalling unit 220VAC | IP44 | 0.8 |
13 | Relay box 24VDC | IP44 | 0.8 |
14 | Relay box 220VAC | IP44 | 0.8 |
15 | Zener safety barrier | IP44 | 3.5 |
16 | Junction box | IP22 | 2~8 |
Click the following for detail products information
More…
BATTERYLESS TELEPHONE JUNCTION BOX
Model:HX-8
Installation: Wall mounting type
It is used for connect the batteryless telephones. Its capacity is 8pcs telephones.
BATTERYLESS TELEPHONE JUNCTION BOX
Model:HX-12
Installation: Wall mounting type
It is used for connect the batteryless telephones. Its capacity is 12pcs telephones.
EXPLSION-PROOF TYPE DIRECT-WAY BATTERYLESS TELEPHONE
Model:HSC-1EX
Installation: Wall mounting type
It is generally located in hazardous area for loud and clear communication for different vessels. It can work as sound powered telephone and common telephone.Two single-way batteryless telephones can be connected for communication.
EXPLSION-PROOF TYPE MULTI-WAY BATTERYLESS TELEPHONE
Model:HSC-12EX
Installation: Wall mounting type
It is generally located in hazardous area for loud and clear communication for different vessels. It can work as sound powered telephone and common telephone.Two single-way batteryless telephones can be connected for communication.
FLASH LIGHT SIGNAILING UNIT
Model:FR-100Z / FR-100J
Installation: Wall mounting type
It is generally used for connect the batteryless telephone in noise area. When telephone is ring, it will send visual and audible signal.
FLASH LIGHT SIGNAILING UNIT
Model:FR-100Z / FR-100J
Installation: Wall mounting type
It is generallyis used for connect the batteryless telephone in noise area. When telephone is ring, it will send visual and audible signal.
FLUSH TYPE DIRECT-WAY BATTERYLESS TELEPHONE
Model:HSC-1Q
Installation: Flush mounting type
It is generally located in control rooms for safe, loud and clear communication for different vessels. It can work as sound powered telephone and common telephone.
FLUSH TYPE MULTI-WAY BATTERYLESS TELEPHONE
Model:HSC-12Q
Installation: Flush mounting type
It is generally located in control rooms for safe, loud and clear communication for different vessels. It can work as sound powered telephone and common telephone.
HEADSET TYPE DIRECT-WAY BATTERYLESS TELEPHONE
Model:HSC-1J
Installation: Wall mounting type
It is generally located in control rooms for safe, loud and clear communication for different vessels. It can work as sound powered telephone and common telephone.Two single-way batteryless telephones can be connected for communication.
HEADSET TYPE MULTI-WAY BATTERYLESS TELEPHONE
Model:HSC-12J
Installation: Wall mounting type
It is generally located in noise area for safe, loud and clear communication for different vessels. It can work as sound powered telephone and common telephone.Two single-way batteryless telephones can be connected for communication.
WALL TYPE DIRECT-WAY BATTERYLESS TELEPHONE
Model:HSC-1G
Installation: Wall mounting type
It is generally located in control rooms for safe, loud and clear communication for different vessels. It can work as sound powered telephone and common telephone.
WALL TYPE MULTI-WAY BATTERYLESS TELEPHONE
Model:HSC-12G
Installation: Wall mounting type
It is generally for safe, loud and clear communication for different vessels. It can work as sound powered telephone and common telephone.